If you’ve ever hired a professional plumber for something simple, you know how expensive and annoying the experience can be. If you’d like to save a little cash by learning how to solve your own plumbing problems, read on. This article will give you the knowledge you need for your own plumbing repair.
Avoid frozen pipes this winter! Keep a small trickle of water dripping from faucets, and wrap your uninsulated pipes with foam or newspaper. If possible, keep the doors open between unheated and heated rooms. In an unheated area such as a garage or laundry room, keep a small heater next to the pipes. Remember to do this before the first cold snap hits.
Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.
Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.
Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.
Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.
Garbage disposals are a common cause of plumbing problems, which is an easy problem to solve. Don’t just put everything down the disposal or treat it like a second trash can. Use the disposal things that would be difficult to dispose of normally. Putting all leftover food down the sink is a good way to produce clogs.
One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.
If you have an underground leak in your pipes, it is possible to detect the leak before digging. Today’s leak detection equipment is very sophisticated and modern, allowing technicians to detect and pinpoint exactly where leaks are before they go about trying to fix them with professional grade equipment for you.
Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.
When leaving on vacation or leaving your vacation home, be sure to turn off the main water before you leave. If something happens while you are gone you can cause some serious damage from a flooded basement or a broken pipe in the wall that leaks for weeks until you return.
Governmental regulations sometimes prevent plumbers from actively providing maintenance to copper piping. If you have a calcium buildup in your copper piping, you are going to need to take care of this yourself. You have to get rid of all the water and add vinegar which eats away the calcium buildup out of copper pipes.
If you cannot turn off your main water valve before leaving on vacation, turn off the individual valves for the toilets, sinks, and washing machine. If the valves do not look like they are in good working order, then leave them on and that will be something that you need to have changed when you return.
The water heater in your home needs to have regular flushing to its plumbing in order to work properly. There is usually a valve at the bottom of the water heater that a hose can be attached to. Connect a hose to this valve and open it up all the way to flush scale and deposits out of the system.
If you think you understand what is wrong with your toilet, but aren’t sure, you should first do some more research on the internet. Most plumbing problems are fairly standard, and you should be able to read about the problem in great detail on several amateur plumber forums to make sure you understand the problem.
Having to wiggle the toilet handle or hold it down to get your toilet to fully flush indicates that the tank parts need to be replaced. Kits that include all of the parts needed can be purchased in any hardware or home improvement store to easily do the repair yourself.
Do not use a chemical drain opener when you are attempting to unclog your drains. Despite the effectiveness of these products in unclogging pipes, the ingredients within them are not friendly to skin contact. If you decide to use them, protect your arms and hands so they are not exposed to these chemicals.
An important plumbing-related decision that must be made these days is the choice between an electric water heater or a gas water heater. In these times with gas costing as much as it does, it is more cost efficient to buy an electric water heater, especially if you have a smaller water heater.
As you can see, hiring a professional plumber is usually an unnecessary and expensive thing to do, compared to fixing the problem yourself. Next time your plumbing needs repair, try pulling up this article and trying to solve it yourself. You may be surprised how easy it is to do!