You think anything dealing with HVAC is complicated. This is something you must do your homework on. But it can be simpler to educate yourself about the matter with all the information that is available.
Although most people are thinking of their heating systems during the winter months, air conditioning is also important. When installing a new furnace or heating system, make sure the air ducts are also set up to work with your air condition system. Using the ducts for both heating and cooling is the most economical choice.
Do not be surprised if the HVAC contractor you choose does an evaluation on your home. Any good contractor will spend time looking at the system you currently have and what the needs are for your home. They will also take a look at your duct system and look for air leaks.
Make sure the equipment you are buying is ENERGY STAR compliant. It may seem a small thing, but it isn’t. Products that are ENERGY STAR compliant can save you a lot of money in energy costs over the year. It can be over $100 easily, sometimes a lot more.
When you are no longer using your outdoor air conditioning unit, be sure to protect it with a tight cover. This will keep it free of debris, frost and snow so that you’ll have a working unit when the spring comes and you are ready to uncover it and use it again.
Ask for references and be sure to call them as well. You are dealing with a high ticket item here, so you’ll want to do your due diligence to make sure you are getting the best for your money. Ask for references, but don’t stop there. Call each reference to check. A lot of people don’t take that important last step.
If you want to cool your home in the summer without using your air conditioning on full, consider installing fans in your home. An attic fan can blow hot air out while sucking in cool air into your basement, and ceiling fans help distribute the air in your rooms evenly.
One great way to save some cash when you’re working on keeping a home cool is to install a thermostat that’s programmable. It may save you as much as 10 percent of your overall utility bill if you turn your thermostat down by 10-15 degrees for a portion of the day. Take advantage of the convenience of the ability to control many programable thermostats from your favorite electronic device.
Make sure to have your unit serviced once a year. During your service visit, the serviceman will inspect the unit’s motor, oil the unit’s moving parts and ensure the unit has proper freon levels. This will help your system run better.
Save energy use and money by turning off the air conditioner if there is nobody home. When you turn it off, the house heats up, but only to a certain threshold. If will be constantly fighting the heat and using lots of electricity if it is left on all day.
When you are looking for a service provider to perform service on your HVAC system, look for a company that stands behind their work. This is especially important if your compressor or condenser is being repaired. Repairs to these two things are extremely expensive, so you want to ensure that the service provider warranties their work.
Installing a whole-house fan can either cool your home without the use of air conditioning or make your air conditioner more efficient. It blows out all of the hot air which collects in your attic, and this air flow draws in cool air from your basement and up into your home.
To run an efficient HVAC, you must ensure your house is fully insulated. First, check into your attic to find out if you have the right kind of insulation and enough of it. If not, investing in getting that up to grade is better than installing a strong HVAC system!
If you plan on having a service on your HVAC unit, ask the technician what he will be doing. Any thorough service should consist of several things. The technician should check temperature levels, pressures, amperage draw, and coolant levels. They should adjust any belts that need it and clean the coils.
Think about installing a digital programmable thermostat to keep your heating and cooling bills low. These digital thermostats have timers that allow you to completely control your HVAC use. You can set the heat and cooling to only turn on when you are home and to turn off when you are at work.
Learn the rules and regulations regarding licenses and insurance before hiring an HVAC professional. This way you can check to make sure that any contractor you consider hiring meets any requirements. This can prevent a costly legal process, especially in case of an accident on site. Without insurance, you could be held liable for damages.
When choosing the proper air conditioner size, measure the area that needs cooling. You can usually substitute 20 BTU for each square foot in the area to be cooled. If you need to cool multiple rooms, make sure to add the square footage together.
If your outdoor compressor unit sits in the sun, consider building a shade over it. Air in the shade is about 5 degrees cooler than air in the sun. This can have a significant impact on your cooling bill. When done properly, you could see up to a 10 percent savings over the season.
When buying an HVAC system from a contractor, don’t just purchase from the first person you find. Do a little investigating first. Make sure the person has been in business for a while. Although there are no guarantees, someone who has been around for 10+ years probably had to do something right to stay in the business.
This article was written to help make you comfortable and familiar with the average HVAC system. It can be hard to get going without motivation, so take all of this information into account as you get started. You will be satisfied with the results.